Introduction It’s relatively easy to enable vSAN on our Nested lab, so let’s take a short detour. My previous posting on Nested ESX setup is here. And the physical network setup is here. I originally had setup my nested lab with vSAN but immediately got very low disk IO performance of about 2 IOPS, so I switched to NFS storage. Even NFS had sub-par … Continue reading Adding VSAN to my Nested ESXi lab
This part continues to build out NSX on top of the Nested ESX cluster created in the last part ESX/NSX nested lab – Part I. Part I included some basic NSX setup for convenience such as. NSX Manager installed from OVF, and linked to vCenter. Physical network ESXi uplinks included allowed vLAN 100 for vxlan. distributed switch set to allow Jumbo 9000 MTU, (> 1600 MTU … Continue reading ESX/NSX nested lab – Part II
Introduction This post documents my evolving home-lab setup as of December 2018 ￼Since many of my clients are smaller SMB’s they often need hands-on help with physical storage, networking and security in addition to VMware. Since my background was coming from a software ( not IT ) area I needed a lab that used physical hardware ( e.g production servers and network equipment ) Equipment … Continue reading vSphere / ESXi homelab setup
Introduction page Physical Lab setup This part includes setup of Nested ESX VM’s. The second part will include nested NSX. Setup This section covers what worked for me and the major steps required. You may need to reference the listed links for more info. The steps to setup the lab are: I have two ESXi physical host running ESX 6.5 (typical) 128GB RAM, 2 sockets, … Continue reading ESX/NSX nested lab – Part I
Note: I’ve recently re-done my lab and found significant changes to this post, so I’m re-writing this post and splitting it into two parts.
- For reference: My physical Lab setup
- Continue on with the following parts:
This guide documents how I setup my working nested ESX/NSX lab after having numerous problems setting up the nested ESX 6.5 appliance with NSX with existing documentation. One issue is that most nested ESX/NSX documentation covers ESX5.5, and much has changed since then, and it’s not immediately clear what parts to skip or use.
This guide covers items specific to nested ESXi & NSX. Since this is a lab, only a single NSX controller is used to save resources, but if you have the capacity all 3 can be installed.
Thanks to William Lam’s ESX appliance and blog entries below I was able to get started with nested ESXi, but I continued to have random issues with networking as there are numerous moving parts and most of the physical networking is not described. My lab tries to stay close to production recommendations of keeping networking, storage, and vMotion on separate vLANS, and this lab maintains that separation as much as possible.
I’m moving away from William Lam’s ‘vGhetto ESXi’ appliance, as most of the features added in that appliance are now handled directly by ESXi 6.5 and later such as:
- The vGhetto ESXi appliance has ESX Mac learn dvFilter installed, which conflicts with the newer method of using ESX-LearnSwitch on the physical host.
- ESXi 6.0+ installer now has vmtools pre-installed , so that feature of the appliance isn’t needed anymore. When ESXi detects that is is running as a VM, the vmtools is activated automatically.
- The ESXi cloning referenced in link #3 had numerous issues with dropped packets on vMotion and NFS so I’m not recommending cloning for ESXi 6.5. Creating new ESXi hosts with a fresh ISO install had no issues. Cloning is untested for ESXi 6.7
- ESXi 6.7 and later have ESX-Learnswitch VIB pre-installed so skip the install on the physical host.